INSTITUT FÜR

FERTIGUNGSTECHNIK UND

QUALITÄTSSICHERUNG

Non-destructive evaluation of mechanical properties of additive manufactured plastic parts by practical application of DIN SPEC 17028:2021-04
In: Konferenz: ASTM International Conference on Additive Manufacturing, ASTM ICAM 2021, online, November 1-5, 2021, ASTM International Conference on Additive Manufacturing - ASTM International Additive Manufacturing Center of Excellence . - 2021

A novel approach for a modular taper junction in hip stems using turn-milling
In: CIRP journal of manufacturing science and technology/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 33 (2021), S. 256-263

Effect of deep rolling on subsurface conditions of CoCr28Mo6 wrought alloy to improve the wear resistance of endoprostheses
In: Journal of the mechanical behavior of biomedical materials - Amsterdam [u.a.]: Elsevier, Bd. 118 (2021)

Force and temperature conditions of face milling with varying chip quotient as a function of angle of rotation
In: Manufacturing technology - Usti nad Labem: J. E. Purkyne University in Ústí nad Labem, Bd. 21 (2021), 2, S. 214-222

Jet electrochemical machining simulation of intersecting line removals with adjustable nozzle diameter by a finite area element grid
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 102 (2021), S. 349-354

Simulation of the burnishing process on real surface structures
In: Precision engineering - Amsterdam [u.a.]: Elsevier Science, Bd. 68 (2021), S. 166-173

The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method
In: CIRP journal of manufacturing science and technology/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 32 (2021), S. 61-69

Additive Fertigung - Methode zur zerstörungsfreien Ermittlung von mechanischen Eigenschaften von additiv gefertigten Kunststoffteilen
In: DIN SPEC 17028:2021-04, Beuth Verlag GmbH

Experimental Characterisation of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation
In: Procedia CIRP, Elsevier BV, 2020, Bd. 95, S. 505-510

Experimental analysis of the shape accuracy in electrochemical polishing of femoral heads for hip endoprosthesis
In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 47 (2020), S. 719-724

Experimental characterization of resource efficient process chains for electrochemical precision machining of form-bore patterns
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 748-753

Experimental study on micro forming of structured surfaces for high static friction connection elements
In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 47 (2020), S. 1230-1234

Random sequential simulation of the resulting surface roughness in plasma electrolytic polishing of stainless steel
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 981-986

Surface integrity aspects in gear manufacturing
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 87.2020, S. 3-12

Working gap analysis in electrochemical precision machining of external geometries with ring cathodes
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 662-667

Transient removal simulation of the jet electrochemical machining process based on a finite area element grid
In: International Symposium on Electrochemical Machining Technology INSECT 2020: proceedings : November 24-25, 2020/ International Symposium on Electrochemical Machining Technology - [Chemnitz]: Professorship Micromanufacturing Technology, Chemnitz University of Technology; Schubert, Andreas . - 2020, S. 105-116 - (Scripts precision and microproduction engineering; volume 14)

Die Anwendung des Drehfräsens zur Erzeugung von funktionalen Oberflächen
In: Magdeburg, 2020, XIV, 126 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 116-126]

Inverses Spanungsverhältnis - eine neue Strategie für das Planfräsen
In: Düren: Shaker Verlag, 2020, IX, 134 Seiten, Illustrationen, 21 cm, 218 g - (Berichte aus dem Institut für Fertigungstechnik und Qualitätssicherung Magdeburg; Band 47)

Micro product and process fingerprints for zero-defect net-shape micromanufacturing
In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, S. 98-99, 2019

3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 196-201

Characteristics of different cathodic arc deposition coatings on CoCrMo for biomedical applications
In: Journal of the mechanical behavior of biomedical materials - Amsterdam [u.a.]: Elsevier, Bd. 97 (2019), S. 212-221

Entwicklung eines mathematischen Modells des Glättens unter Einsatz von FEA
In: Rezanie i instrumenty v technologieskich sistemach / Char\'kovskij Gosudarstvennyj Politechnieskij Universitet - Char\'kov: ChGPU, Bd. 91 (2019), S. 58-68

Focusing of x-rays emitted by a pyroelectric x-ray generator for micro x-ray fluorescence
In: Journal of vacuum science & technology / B: JVST ; the official journal of the American Vacuum Society - New York, NY: Inst., Vol. 37.2019, 1, Artikel 011203

Implementation of the Machine Tool-Specific Current and Voltage Control Characteristics in Multiphysics Simulation of Electrochemical Precision Machining
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 237-242

Influence of cutting ratio and tool macro geometry on process characteristics and workpiece conditions in face milling
In: CIRP journal of manufacturing science and technology: CIRP-JMST/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 24 (2019), S. 1-5

Integrated strain gauge printing in a CFRP structure
In: Journal of machine engineering - Wrocław: Editorial Institution of the Wroclaw Board of Scientific Technical Societies Federation NOT, 2006, Bd. 19.2019, 3, S. 75-82

Localized anodization of the aluminum alloy EN AW-7075 T6 by closed electrolytic free jet
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2019, Bd. 480, S. 012015

Multiphysics Simulation of Oxide Layer Growth in Localized Anodization of Aluminum Applying a Free-Surface Electrolyte Jet
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 243-248

Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density
In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 4, S. 261

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology
In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 3, S. 214

Resource-efficient piston ring/cylinder liner pairing
In: Industrial lubrication & tribology - Bradford: MCB Univ. Press, Bd. 71 (2019), 1, S. 154-163

Deburring and Edge Shaping by Electrochemical Machining with Differentially Switched Currents ...
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN: 978-3-00-064086-5

Kühlschmierstoffeinfluss beim Langhubhonen - Betrachtung von Schnittkräften, Oberflächentopografie und tribologischem Betriebsverhalten der Werkstücke
In: Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen - Essen: Vulkan . - 2019, S. 319-330

Leichte Strukturen in Werkzeugmaschinen für die Optimierung von Zerspanprozessen
In: 14. Magdeburger Maschinenbau-Tage 2019 - Magdeburger Ingenieurtage - 24. und 25. September 2019 : Tagungsband - Magdeburg: Otto von Guericke Universität Magdeburg, Fakultät Maschinenbau, Institut für Mobile Systeme - Lehrstuhl Mechatronik, 2019 . - 2019, S. 209-217

Modelling of Precise Electrochemical Machining for Nickel-based Centrifugal Impellers
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Process Design for Jet Plasma electrolytic Polishing of Stainless Steel
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Process design for jet plasma electrolytic polishing of stainless steel
In: International Symposium on Electrochemical Machining Technology INSECT 2019: proceedings : November 14-15, 2019, Institute of Production Engineering, Saarland University, Saarbrücken, Germany / editors: Dirk Bähre, Alexander Ernst: proceedings : November 14-15, 2019, Institute of Production Engineering, Saarland University, Saarbrücken, Germany/ International Symposium on Electrochemical Machining Technology - Saarbrücken: Institute of Production Engineering, 2019 . - 2019, S. 125-132 ; [Symposium: 15th International Symposium on Electrochemical Machining Technology, Saarbrücken, November 14 - 15, 2019]

Removal rate and surface roughness in plasma-electrolytic polishing of 1.4441 stainless steel
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Simulation-based Design of an Electrolyte System for Electrochemical Machining with Differentially Switched Currents
In: Proceedings of the 6th International Conference on Competitive Manufacturing, 2019, ISBN: 978-0-7972-1779-9

Ein Beitrag zum Temperaturverhalten und zur thermischen Belastung beim trockenen Wälzfräsen
In: Magdeburg, 2019, X, 116 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 106-115]

Intelligente Vorrichtungen für die Prozessüberwachung und -beeinflussung in der zerspanenden Fertigung dünnwandiger Bauteile
In: Magdeburg, 2019, XVIII, 117 Seiten, Seite XIX-XLV, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite XIX-XLV]

Investigations on electrical properties and correlations to electron and X-ray energies of pyroelectric LiTaO3and LiNbO3
In: 2018 31st International Vacuum Nanoelectronics Conference (IVNC): technical digest : Kyoto, Japan, 9-13 July 2018 - [Piscataway, NJ]: IEEE, insges. 2 S.

Self-focusing of electrons emitted by rectangular pyroelectric crystals - a study on geometrical conditions for optimized X-ray intensities
In: 2018 31st International Vacuum Nanoelectronics Conference (IVNC): technical digest : Kyoto, Japan, 9-13 July 2018 - [Piscataway, NJ]: IEEE, insges. 2 S.

Multiphysics simulation of localised anodisation of aluminium
In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018, S. 429-430, 2018

Numerical Investigation of Electrolyte Flow in a Multi-Cathode System for Electrochemical Machining
In: Proceedings of the European COMSOL Conference 2018

Simulation-based Analysis of a Microstructuring Process for Serrated Surfaces with Higher Friction
In: Proceedings of the European COMSOL Conference 2018

Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel
In: Proceedings of the European COMSOL Conference 2018

Analysis of the fundamental removal geometry in electrochemical profile turning with continuous electrolytic free jet
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 466-470

Das Potential des Drehfräsens - Wertschöpfung durch Drehfräsen in Bezug auf die Ausbildung von Oberflächentopografien
In: wt Werkstattstechnik online - Düsseldorf: VDI Fachmedien, 1999 . - 2018, 1/2, S. 26-30

Derivation of Guidelines for Reliable Finishing of Aluminium Matrix Composites by Jet Electrochemical Machining
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 471-476

Design of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 678-683

Determination of specific cutting force components and exponents when applying high feed rates
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, 2012, Bd. 77.2018, S. 30-33

Effects of the tool edge design on the roughness of face milled surfaces
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, 2009, Vol. 448.2018, 1, Art. 012056, insgesamt 12 S.

Modelling of turn-milled surfaces
In: The international journal of advanced manufacturing technology - London: Springer, 1985 . - 2018, insges. 9 S.

Optimization of pyroelectric electron sources for the generation of x-rays for x-ray fluorescence applications
In: Journal of vacuum science & technology / B: JVST : the official journal of the American Vacuum Society - New York, NY: Inst, Vol. 36.2018, 2, Art. 02C101

Study on the Influence of the Processing Speed in the Generation of Complex Geometries in Aluminium Matrix Composites by Electrochemical Precision Machining
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 713-718

Characterization of the Lateral Working Distance in Precise Electrochemical Machining of Differently Heat Treated Steel
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Design of a Test Rig for Local Surface Modification by Jet Plasma Electrolytic Polishing
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Different approaches in minimizing burrs for drilling processes in hard to machine materials
In: Development in machining technology ; Vol. 8 - Cracow: Cracow University of Technology, 20; Vol. 8 . - 2018, S. 7-17

Experimental Derivation of Process In-put Parameters for Electrochemical Machining with Differentially Switched Currents
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Preliminary investigations for the effect of cutting tool edge geometry in high-feed face milling
In: Vehicle and Automotive Engineering 2: proceedings of the 2nd VAE2018, Miskolc, Hungary - Cham: Springer International Publishing, 2018; Jármai, Károly . - 2018, S. 241-254

Simulation-based Design of Electrochemical Machining Processes for Microstructuring of High-strength Materials
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Simulationsbasierte Gestaltung von elektrochemischen Abtragprozessen für hochfeste Materialien
In: Tagungsband zum 1. Kolloquium der sächsischen Allianz für Material- und ressourceneffiziente Technologien, Verlag Wissenschaftliche Scripten, 2018, ISBN 978-3-95735-091-6

Surface structuring of boron doped CVD diamond by micro electrical discharge machining
In: AIP Conference Proceedings 1960, 2018

Leibniz und Guericke im Diskurs - die Exzerpte aus den "Experimenta Nova" und der Briefwechsel
In: Boston: De Gruyter, 2019, 195 Seiten, Illustrationen, 23 cm x 15.5 cm

Elektrochemisches Abtragen im Freistrahl
In: Mikroproduktion, 6:34-39, 2018

Methode zur Bestimmung von Prozesseingangsgrößen für das elektrochemische Präzisionsabtragen Anforderungen, Kriterien, Festlegungen
In: DIN SPEC 91399:2018-12, Beuth Verlag GmbH

Analysis of Mixing Chambers for the Processing of Two-component Adhesives for Transport Applications
In: Proceedings of the European COMSOL Conference 2017

Approximation of the Flow Field in Electrochemical Machining Incorporating Pressure Drop Calculation
In: Proceedings of the European COMSOL Conference 2017

Investigation of Forced Convection in Pin Structured Cold Plates for Improved Heat Transfer and Heat Spreading
In: Proceedings of the 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2017

Multiscale Model of the PECM with Oscillating Cathode for External Geometries using a Virtual Switch
In: Proceedings of the European COMSOL Conference 2017

Stress optimized hard nitride coatings for high-performance gear hobbing
In: ResearchGATE - Cambridge, Mass.: ResearchGATE Corp., 2017

A new strategy in face milling : inverse cutting technology
In: Solid state phenomena: SSP - Baech: Trans Tech Publications Ltd., Bd. 261 (2017), S. 331-338

Analysis of the textured surface of tangential turn-milling
In: Materials Performance and Characterization - West Conshohocken, Pa.: ASTM International . - 2017

Cemented carbide tools in high speed gear hobbing applications
In: CIRP annals, manufacturing technology/ International Institution for Production Engineering Research - Paris: CIRP, 1964, Bd. 66.2017, S. 117-120

Characterization of an Electrochemical Machining Process for Precise Internal Geometries by Multiphysics Simulation
In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 175-180

Downscaled anodic oxidation process for aluminium in oxalic acid
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012044

Einfluss der Fertigungsparameter beim Drehfräsen auf die Funktionsoberflächen
In: VDI-Z: Zeitschrift für integrierte Produktion ; vereinigt mit Ingenieur-Werkstoffe / Hrsg.: Verein Deutscher Ingenieure: Zeitschrift für integrierte Produktion ; vereinigt mit Ingenieur-Werkstoffe/ Verein Deutscher Ingenieure - Düsseldorf: Springer-VDI-Verl., 1969, Bd. 159.2017, 4, S. 53-55

Influence of the tool profile on the wear behaviour in gear hobbing
In: CIRP annals, manufacturing technology - Paris: CIRP, 2017

Localised anodic oxidation of aluminium material using a continuous electrolyte jet
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012042

Multiscale Multiphysics Simulation of a Pulsed Electrochemical Machining Process with Oscillating Cathode for Microstructuring of Impact Extrusion Punches
In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 257-262

Pyroelektrische Röntgenquellen zum Einsatz in der Materialanalyse - Optimierung der material- und vakuumtechnischen Eigenschaften
In: Vakuum in Forschung und Praxis: Zeitschrift für Vakuumtechnologie, Oberflächen und Dünne Schichten - Weinheim: Wiley-VCH, Bd. 29.2017, 5, S. 36-41

Analysis of the Removal Geometry in Electrochemical Straight Turning with Continuous Electrolytic Free Jet
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon
In: AIP Conference Proceedings, Volume 1896, 2017

Development of Interfaces for Material Data Integration in Models of Electrochemical Machining Processes
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Entwicklung eines neuartigen Werkzeuges für die Frässchleifbearbeitung von ebenen Flächen ohne und mit Nebenformstrukturen - Frässchleifwerkzeug
In: 13. Magdeburger Maschinenbau-Tage 2017: autonom - vernetzt - nachhaltig, 27. und 28. September 2017 : Tagungsband/ Magdeburger Maschinenbau-Tage - Magdeburg: Universitätsbibliothek; Kasper, Roland . - 2017, S. 477-484

Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Intensitätsoptimierung von pyroelektrischen Röntgenquellen zum Einsatz in der Materialanalyse
In: 16. Sommerkurs Werkstoffe und Fügen: Magdeburg, 08. und 09. September 2017 - Magdeburg: Universitätsbibliothek, S. 105-112

Investigations of pyroelectric crystals for vacuum electron sources and X-ray applications
In: 2017 30th International Vacuum Nanoelectronics Conference (IVNC): technical digest : Herzogsaal Regensburg, Germany, 10-14 July 2017 - [Piscataway, NJ]: IEEE, S. 166-167

Modification of the process dynamics in micro-EDM by means of an additional piezo-control system
In: AIP Conference Proceedings 1896, 2017

Reduplication of Precise Internal Geometries by Pulsed Electrochemical Machining
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Simultaneous turn-milling for micro-structuring of trobologically highly loaded rolling elements
In: Development in machining technology / ed. by Wojciech Zebala ; Ildikó Manková - Cracow: Cracow University of Technology; Ze̜bala, Wojciech, 2017, Artikel 11, S. 115-123 - (Scientific research reports; 7)

Simultaneous turn-milling with targeted micro-structuring on the exemple of tribological high-pressured rolling elements
In: Development in machining technology / ed. by Wojciech Zebala ; Ildikó Manková - Cracow: Cracow University of Technology; Ze̜bala, Wojciech, 2017, Artikel 13, insgesamt 1 S. - (Scientific research reports; 7)

Microstructuring of Joining Areas in Aluminum Alloy Sheets by Jet Electrochemical Machining
In: Technologies for Lightweight Structures, Volume 1, 2017, S. 17-25

2-D Axisymmetric Simulation of the Electrochemical Machining of Internal Precision Geometries
In: Proceedings of the European COMSOL Conference 2016

Analysis of an Electrochemical Machining Process for Particle Reinforced Aluminium Matrix Composites
In: Proceedings of the European COMSOL Conference 2016

Transient Simulation of an Electrochemical Machining Process for Stamping and Extrusion Dies
In: Proceedings of the European COMSOL Conference 2016

Evaluation of the Technical-Economic Potential of Particle- Reinforced Aluminum Matrix Composites and Electrochemical Machining
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012035

Fast Determination of the Material Removal Characteristics in Pulsed Electrochemical Machining
In: Procedia CIRP, Elsevier BV, 2016, Bd. 46, S. 123-126

Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical Machining
In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 384-389

Generation of Defined Surface Waviness on Tungsten Carbide by Jet Electrochemical Machining with Pulsed Current
In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 231-234

Intelligent tools for predictive process control
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, 2012, Bd. 57.2016, S. 539-544

Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiN
In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 727-732

Jet Electrochemical Machining of Particle Reinforced Aluminum Matrix Composites with Different Neutral Electrolytes
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012036

Potentials for improving efficiency of combustion engines due to cylinder liner surface engineering
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 46 (2016), S. 258-265

Reduction of friction in the cylinder running surface of internal combustion engines by the finishing process
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 45 (2016), S. 87-90

Surface Characterization of Particle Reinforced Aluminum-matrix Composites Finished by Pulsed Electrochemical Machining
In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 351-354

Vakuummikro- und Vakuumnanoelektronik mit Feldemission - Besonderheiten der Spannungsfestigkeit bei Abständen unter 10 m
In: Vakuum in Forschung und Praxis: Zeitschrift für Vakuumtechnologie, Oberflächen und Dünne Schichten - Weinheim: Wiley-VCH, Bd. 28.2016, 6, S. 42-48

3D CFD Simulation of Electrochemical Machining Based on Dissolving Characteristics within the SIREKA Joint Research Project
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Design and Realisation of a Specific Device for Jet Electrochemical Machining of Rotating Work Pieces
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Development of an intelligent chuck system for the improved manufacturing of thin walled parts
In: Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology: May 30th-3rd June 2016, Nottingham, UK / editors: P. Bointon, R. Leach, N. Southon: May 30th-3rd June 2016, Nottingham, UK/ European Society for Precision Engineering and Nanotechnology - Bedford, UK: Euspen, 2016; Bointon, P. . - 2016 ; [Kongress:16th International Conference of the European Society for Precision Engineering and Nanotechnology, May 30th-3rd June 2016, Nottingham, UK]

Digitale Durchdringung von komplexen Fertigungsprozessen am Beispiel des Wälzfräsens
In: \"KMU 4.0\" - Intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen - Fertigungstechnisches Kolloquium Magdeburg: Fertigungstechnisches Kolloquium Magdeburg/ Fertigungstechnisches Kolloquium Magdeburg - Magdeburg: Otto-von-Guericke-Universität, 2016, 2016, Kap. 8, insgesamt 12 S. ; [Kongress: Fertigungstechnisches Kolloquium Magdeburg, 9./10. März 2016, Magdeburg]

Experimental Derivation of Processing Strategies for Electrochemical Precision Machining of Aluminium Matrix Composites
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Intelligentes Wälzfräsen - wie Simulation diesen komplexen Prozess verbessert
In: Adaptive and smart manufacturing: Wiener Produktionstechnik Kongress 2016 : WPK 2016, 28.-29.9.2016 / Friedrich Bleicher (Hg.) ; Institute for Production Engineering and Laser Technology TU Wien: Wiener Produktionstechnik Kongress 2016 : WPK 2016, 28.-29.9.2016/ Wiener Produktionstechnik Kongress - Wien: nap - new academic press, 2016 . - 2016, S. 167-173 ; [Kongress: Wiener Produktionstechnik Kongress 2016, Wien, 28. - 29.09.2016]

Removal Characteristic of Stainless Steel in Pulsed Electrochemical Machining
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Basic Research on Electrochemical Machining of Particle Reinforced Aluminium Matrix Composites
In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015

Optimized design of electrochemical machining processes by a combination of 3D simulation and rapid prototyping of cathodes
In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015

Verschleißeinflüsse und Potenziale beim Wälzfräsen
In: Zerspanen im Modernen Produktionsprozess: Fachgespräch zwischen Industrie und Hochschule ; Dortmund, 23./24. September 2015 - Dortmund: ISF, 2015 . - 2015, S. 58-73

A novel simulation approach to determine thermally induced geometric deviations in dry gear hobbing
In: Procedia CIRP - Amsterdam [u.a.]: Elsevier, 2012, Bd. 31.2015, S. 483-488

Micro Electrical Discharge Machining of Tungsten Carbide with Ultra-Short Pulse
In: Key Engineering Materials, Trans Tech Publications, Ltd., 2015, Bd. 651-653, S. 759-764

Moderne Vakuumelektronik - im Spannungsfeld zwischen Nostalgie und Hochtechnologie
In: Vakuum in Forschung und Praxis: Zeitschrift für Vakuumtechnologie, Oberflächen und Dünne Schichten - Weinheim: Wiley-VCH, 1989, Bd. 27.2015, 1, S. 22-27

Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining
In: Procedia CIRP, Elsevier BV, 2015, Bd. 31, S. 197-202

Quantification of the gas development in the electrochemical precision erosion [Quantifizierung der Gasentwicklung beim elektrochemischen Präzisionsabtragen]
In: Galvanotechnik, Bd. 106, 3, S. 484-489, 2015

Study on the dynamic generation of the jet shape in Jet Electrochemical Machining
In: Journal of Materials Processing Technology, Elsevier BV, 2015, Bd. 223, S. 240-251

Analysis of a PECM Electrode Concept for Micro Injection Moulds by Multiphysics Simulation
In: Proceedings of the 4M/ICOMM2015 Conference, Research Publishing Services, 2015

Characterisation of the Influence of Material Hardness in Precise Electrochemical Machining of Steel
In: Proceedings of the 17th International Conference on the Strength of Materials (ICSMA 17), 2015, ISBN 978-80-87434-07-9

Endformgebung von hochfesten, partikelverstärkten Aluminiummatrix-Verbundwerkstoffen (AMCs) durch elektrochemisches Abtragen
In: DGM-Magazin dIALOG, Ausgabe 4, 2015, S. 104107, ISSN 2193:3383

Entwicklung eines intelligenten Werkstückhalters für die Fertigung dünnwandiger Bauteile
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015: 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015/ Magdeburger Maschinenbau-Tage - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015 . - 2015 ; Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01) ; [Beitrag auf CD-ROM]

Simultantes Drehfräsen zur gezielten Mikrostrukturierung am Beispiel tribologisch hochbelasteter Wälzkörper
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015/ Magdeburger Maschinenbau-Tage - Magdeburg: Otto-von-Guericke-Universität Magdeburg; Gabbert, Ulrich *1947-*, 2015, Beitrag C1-1, insgesamt 10 S. ; Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)

Gestaltung von elektrochemischen Abtragprozessen durch Multiphysiksimulation gezeigt an der Endformgebung von Mikrobohrungen (Habilitationsschrift)
In: Schubert, A. (Hrsg.): Scripts Precision and Microproduction Engineering, Band 10. Verlag Wissenschaftliche Scripten, 2015, ISBN 978-3-95735-028-2

Analysis of strategies for gap control in jet electrochemical machining
In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 439-442, 2014

Analysis of the Electrochemical Removal of Aluminium Matrix Composites Using Multiphysics Simulation
In: Proceedings of the European COMSOL Conference 2014

Application of nucleate boiling with micro structured surfaces for electronic cooling
In: PCIM Europe Conference Proceedings, S. 1141-1148, 2014

Jet-Electrochemical machining of selective laser melted aluminum and steel alloys for micro injection moulds
In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 367-370, 2014

Transient Simulation of the Electrolyte Flow in a Closed Device for Precise Electrochemical Machining
In: Proceedings of the European COMSOL Conference 2014

Electro-chemical precision machining of rotating workpieces [Elektrochemisches Präzisionsabtragen rotierender Werkstücke]
In: Galvanotechnik, Bd. 105, 3, S. 462-467, 2014

Electrochemical machining of hard metals - WC/Co as example
In: Powder Metallurgy, Bd. 57, 1, S. 21-30, 2014

High speed temperature measurement in gear hobbing: Part I: design, concept and physical operation mode of the infrared-camera
In: Production engineering - Berlin: Springer, 2007, Bd. 8.2014, 1/2, S. 73-79

Resource-Efficient Machining of Hard Metals
In: Key Engineering Materials, 2014, S. 708-714, ISSN 1662-9795, 10.4028/www.scientific.net/KEM.611-612.708

Resource-efficient configuration of precise electrochemical ablation processes [Ressourceneffiziente gestaltung des elektrochemischen Präzisionsabtragens]
In: Galvanotechnik, Bd. 105, 4, S. 703-709, 2014

Surface integrity aspects of milled large hardened gears
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, 2012, Bd. 13.2014, S. 37-42

Transition of electron field emission to normal glow discharge
In: IEEE transactions on electron devices: ED ; a publication of the IEEE Electron Devices Society/ Institute of Electrical and Electronics Engineers - New York, NY: IEEE, 1952, Bd. 61.2014, 11, S. 3864 - 3870

An investigation into the influence of micro structures on nucleate boiling processes
In: Advanced Computational Methods and Experiments in Heat Transfer XIII, WIT Press, 2014

Analogy studies of the effect of finishing on the tribological running-in behaviour of engine components using the example of the cylinder running surface
In: Advanced materials research - Baech: Trans Tech Publications Ltd., Bd. 1918 (2014), S. 75-81

Determination of the gas generation during precise electrochemical machining
In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7

Dynamic effects of field emission initiated glow discharge with long pulses
In: 2014 27th International Vacuum Nanoelectronics Conference (IVNC 2014): Engelberg, Switzerland, 6 - 10 July 2014 ; [extended abstracts ] - Piscataway, NJ: IEEE, 2014 . - 2014, S. 145-146 ; Kongress: IVNC 27 (Engelberg, Switzerland : 2014.07.06-10)

Evaluation of Gap Control Strategies in Jet Electrochemical Machining on Defined Shape Deviations
In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7

Gear hobbing - research activities and state of the art
In: Advanced materials research - Zug: Scitec Publ., 1994, Bd. 1918.2014, S. 3-12

Intelligente Komponenten für Werkzeugmaschinen
In: Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz - Fertigungstechnisches Kolloquium Magdeburg ; [2. bis 3. Dezember 2014 Magdeburg]: Fertigungstechnisches Kolloquium Magdeburg ; [2. bis 3. Dezember 2014 Magdeburg] - Magdeburg: Univ., 2014, 2014, Beitrag 11, insgesamt 12 S. ; Kongress: FKM (Magdeburg : 2014.12.02-03)

Self-screening effect of stand-alone CNT field emitter with high aspect ratio
In: 2014 27th International Vacuum Nanoelectronics Conference (IVNC 2014): Engelberg, Switzerland, 6 - 10 July 2014 ; [extended abstracts ] - Piscataway, NJ: IEEE, 2014 . - 2014, S. 136-137 ; Kongress: IVNC 27 (Engelberg, Switzerland : 2014.07.06-10)

Werkzeugentwicklung und -optimierung am IFQ
In: Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz - Fertigungstechnisches Kolloquium Magdeburg ; [2. bis 3. Dezember 2014 Magdeburg]: Fertigungstechnisches Kolloquium Magdeburg ; [2. bis 3. Dezember 2014 Magdeburg] - Magdeburg: Univ., 2014, 2014, Beitrag 6, insgesamt 12 S. ; Kongress: FKM (Magdeburg : 2014.12.02-03)

Zahnradgetriebe - Auslaufmodell oder Technologietreiber
In: Innovations of sustainable production for green mobility ; Pt. 1 - [Auerbach]: Verl. Wissenschaftliche Scripten, 2014; Pt. 1 . - 2014, S. 335-354 - (Reports from the IWU; 80) ; Kongress: ICMC 2014 3 (Chemnitz : 2014.04.08-09) ; [Intermediärsprache: Englisch]

Tribologische Optimierung von Zylinderlaufflächen in Verbrennungsmotoren aus fertigungstechnischer Sicht
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014, XI, 117 Bl., Bl. XIV - XXXVII, Ill., graph. Darst., 30 cm

Elektrochemisches Präzisionsabtragen - neue Möglichkeiten zur Formgebung schwer bearbeitbarer Werkstoffe
In: Ingenieur-Spiegel, 2014, Nr. 3, S. 84-85, ISSN: 1868-5919

2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining
In: Proceedings of the European COMSOL Conference 2013

Determining of micro structuring technologies for nucleate boiling surfaces
In: Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2013

Energy-efficient cooling using microstructures for nucleate boiling process
In: PCIM Europe Conference Proceedings, S. 1036-1041, 2013

Simulation of Heat Transfer on Periodic Microstructured Surfaces for Evaporation Cooling
In: Proceedings of the European COMSOL Conference 2013

Single Discharge Simulations of Needle Pulses for Electrothermal Ablation
In: Proceedings of the European COMSOL Conference 2013

Cryogenic wet-ice blasting - process conditions and possibilities
In: CIRP annals, manufacturing technology. - Paris : CIRP, Bd. 62.2013, 1, S. 319-322

Enhancing Micro-EDM using Ultrasonic Vibration and Approaches for Machining of Nonconducting Ceramics
In: Strojniki vestnik Journal of Mechanical Engineering, Faculty of Mechanical Engineering, 2013, Bd. 59, Heft 3, S. 156-164

Heat flux and temperature distribution in gear hobbing operations
In: Procedia CIRP - Amsterdam [u.a.]: Elsevier, 2012, Bd. 8.2013, S. 456-461

Inverse Jet Electrochemical Machining for Functional Edge Shaping of Micro Bores
In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 378-383

Micro-EDM Milling of Electrically Nonconducting Zirconia Ceramics
In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 297-302

Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 1 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 1]
In: Galvanotechnik, Bd. 104, 6, S. 1133-1144, 2013

Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 2 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 2]
In: Galvanotechnik, Bd. 104, 7, S. 1308-1321, 2013

Microstructuring of carbide metals applying Jet Electrochemical Machining
In: Precision Engineering, Elsevier BV, 2013, Bd. 37, Heft 3, S. 621-634

Edge Rounding of Micro Bores by Inverse Jet Electrochemical Machining
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Electron sources with CNT field-emitter cathodes - design differences for lower and higher emission currents
In: 2013 26th International Vacuum Nanoelectronics Conference (IVNC): 8 - 12 July 2013, Roanoke, VA - Piscataway, NJ: IEEE, 2013 . - 2013, S. 118-119

Jet Electrochemical Machining of Selective Laser Sintered Metals for Micro Injection Moulds
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Neue verstärkte eutektische Keramik für Schneidwerkzeuge
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 10 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

Precise Electrochemical Machining of Rotating Workpieces
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Resource-Efficient Design of Precise Electrochemical Machining
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Zerspankraftuntersuchungen bei der Finishbearbeitung von Zylinderlaufflächen
In: Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen / Hans-Werner Hoffmeister; Berend Denkena (Hrsg.) - Essen: Vulkan-Verl. . - 2013, S. 319-332

Zerspantechnische und tribologische Untersuchungen zur Finishbearbeitung von Zylinderlaufflächen
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ.; Gabbert, Ulrich *1947-*, 2013, Paper B4-2, insgesamt 10 S. ; Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)

Accelerated precision manufacturing through electro discharge machining with ultrasonic vibration assistance
In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 56-57, 2012

Fast micromilling with jet electrochemical machining
In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 54-55, 2012

Functional edge shaping of micro bores by applying Electrochemical Machining
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 420-423, 2012

Micro Structured Surfaces for Thermodynamic Applications
In: Proceedings of the euspen 3rd Topical Meeting - Structured and Freeform Surfaces, 2012

Micro structuring of carbide metals with jet electrochemical machining
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 528-532, 2012

Ultrasonic-assisted micro-EDM of deep bores: Process and discharge analysis
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 391-394, 2012

Werkzeugentwicklung für Hochleistungsprozesse
In: Ressourceneffiziente Technologien für den Powertrain: International Chemnitz Manufacturing Colloquium ICMC 2012 ; Tagungsband - Chemnitz, 2012 . - 2012, S. 309-324 ; Kongress: ICMC (Chemnitz : 2012.04.17-18)

Evaluation of the influence of the electrical voltage in the Jet-ECM [Evaluierung des einflusses des elektrischen potenzials beim Jet-ECM]
In: Galvanotechnik, Bd. 103, 6, S. 1196-1200, 2012

Experimental and numerical determination of cutting forces and temperatures in gear hobbing
In: Key Engineering Materials, Vol. 504-506, 2012, S. 1275-1280, ISSN 10139826, 10.4028/www.scientific.net/KEM.504-506.1275

Grundlegende Betrachtungen zur Wirkung eines 'inversen' Spanungsverhältnisses als Basis für die Fräswerkzeugkonstruktion
In: Rezanie i instrumenty v technologieskich sistemach / Char\'kovskij Gosudarstvennyj Politechnieskij Universitet - Char\'kov: ChGPU, 1998, Bd. 82.2012, S. 312-319

Manufacturing of Tribologically Optimized Surfaces for Powertrain Applications
In: Key Engineering Materials, Trans Tech Publications, Ltd., 2012, Bd. 523-524, S. 799-804

Micro machining with continuous electrolytic free jet
In: Precision Engineering, Elsevier BV, 2012, Bd. 36, Heft 4, S. 612-619

Operation safety and performance of milling cutters with shank style holders of tool inserts
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, 2009, Bd. 48.2012, S. 15-23

Economical and function-oriented manufacturing of cylinder running surfaces of internal combustion engines
In: Future Trends in Production Engineering. - Berlin : Springer Berlin, S. 389-396, 2012

Economical and function-oriented manufacturing of cylinder running surfaces of internal combustion engines
In: 13th International Conference on Tools. - Miskolc : Univ., S. 225-230, 2012 ; Kongress: ICT 2012; 13 (Miskolc, Hungary) : 2012.03.27-28

Edge rounding of EDM micro bores using a plasma electrolytic polishing process
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Effect of Tungsten Carbide Grain Size in Jet Electrochemical Machining
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Electron source design with CNT field-emitter cathode
In: 24th International Vacuum Nanoelectronics Conference (IVNC), 2011: 18 - 22 July 2011, Historische Stadthalle Wuppertal, Germany/ sponsors: Bergische Universität Wuppertal; IEEE - Electron Device Society ... Ed.: Andreas Klümper - Piscataway, NJ: IEEE, 2012 . - 2012, S. 163-164

Electron source with CNT field-emitter cathode - design and practical experience
In: 25th International Vacuum Nanoelectronics Conference (IVNC 2012): Jeju, South Korea, 9 - 13 July 2012 - Piscataway, NJ: IEEE, 2012 . - 2012, S. 342-343

Micro Wire Cutting by Pulsed Electrochemical Machining
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Multiphysics Simulation of the Electrochemical Finishing of Micro Bores
In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0

Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor
In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0

Some results from FEM analysis of advanced milling tool design
In: Proceedings of the Thirteenth International Conference on Tools, ICT 2012, 27 - 28 March 2012, Miskolc, Hungary. - Miskolc : Univ., Department of Production Engineering, S. 265-270 ; Kongress: ICT 2012; 13 (Miskolc, Hungary) : 2012.03.27-28

Tribological conditioning of cylinder running surfaces
In: Proceedings of the ASME International Manufacturing Science and Engineering Conference - 2012. - New York, NY : ASME, insges. 2 S. ; Kongress: MSEC; 7 (Notre Dame, Ind.) : 2012.06.04-08

Alternative strategies in finishing cylinder running surfaces
In: CIRP annals. - Oxford : Elsevier, Bd. 61.2012, 1, S. 559-562

High performance gear hobbing with powder-metallurgical high-speed-steel
In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, 2012, Bd. 1.2012, S. 196-201

Precision turning with localized anodic dissolution
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 513-517, 2011

Structuring of tribological active surfaces for reduction of frictional losses
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 156-159, 2011

Study on the influence of the forming velocity in micro impact extrusion with modular dies
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 1, S. 20-24, 2011

Design and realization of micro structured surfaces for thermodynamic applications
In: Microsystem Technologies, Springer Science and Business Media LLC, 2011, Bd. 17, Heft 9, S. 1471-1479

Manufacturing of surface microstructures for improved tribological efficiency of powertrain components and forming tools
In: CIRP Journal of Manufacturing Science and Technology, Elsevier BV, 2011, Bd. 4, Heft 2, S. 200-207

Micro machining of different steels with closed electrolytic free jet
In: AIP Conference Proceedings, Bd. 1353, S. 1337-1343, 2011

Design of Electrochemical Machining Processes by Multiphysics Simulation
In: Proceedings of the European COMSOL Conference 2011

Evaluation of the Influence of the Electric Potential in Jet Electrochemical Machining
In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7

Micro Electro Discharge Machining of Electrically Nonconductive Ceramics
In: AIP, 2011

Micromanufacturing Of Hard To Machine Materials By Physical And Chemical Ablation Processes
In: AIP, 2011

Precision and Micro ECM with Localized Anodic Dissolution
In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1

Pulsed Electrochemical Machining of Powder Metallurgy Steels
In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7

Ultrasonic Assistance and Nonconductive Materials: Shifting the Boundaries of Micro-EDM
In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1

Vakuumelektronik im Um- und Aufbruch
In: NTZ: Fachzeitschrift für Informations- und Kommunikationstechnik ; Organ des VDE Verband der Elektrotechnik, Elektronik, Informationstechnik e.V. und der Informationstechnischen Gesellschaft im VDE (ITG) - Berlin: VDE-Verl., 1987 . - 2011, 2, S. 42-43

Alternative Strategien in der Fertigung von Zylinderlaufflächen
In: Visnyk Nacionalʹnogo Techničnogo Universytetu Ukraïny \"Kyïvsʹkyj Politechničnyj Instytut\". - KyïvVisnyk Kyïvskoho Politechničnoho Instytutu / Mašinobuduvannja, Bd. 61.2011, 1, S. 30-33 ; [Ukrainisch-deutsche Konferenz für Maschinenbau \"Moderne Werkstoffe und Technologien im Maschinenbau 2011\" ; 1 (Kyiv) : 2011.04.13-14]

Mikrostrukturierung von Zylinderbohrungen
In: VDI-Z integrierte Produktion. - Düsseldorf : Springer-VDI-VerlVDI-Z integrierte Produktion / Special, 1, S. 54-55, 2011

Postprocessor development for multi-axis machining - a literature review
In: Education, Research, Innovation, ERIN 2010 . - Plzen, insges. 6 S. ; Kongress: ERIN 2010; 4 (Plzen) : 2010.03.16-17

Fertigungs- und Oberflächentechnologien für anforderungsgerechte, tribologisch effiziente Oberflächen von Umformwerkzeugen und Powertrain-Bauteilen
In: Tagungsband zum 1. Internationalen Kolloquium des Spitzentechnologieclusters eniPROD, 2010, Herausgeber: R. Neugebauer, ISBN 978-3-942267-00-7

Generating plane and microstructured surfaces applying Jet Electrochemical Machining
In: Proceedings of Fifth International Symposium on Electrochemical Machining Technology, Fraunhofer IKTS Dresden, 2009, Editors: A. Michaelis, M. Schneider, ISBN 978-3-8396-0076-4

Investigating the Influence of Dynamic Jet Shapes on the Jet Electrochemical Machining Process
In: Proceedings of the European COMSOL Conference 2010, ISBN 978-0-9825697-6-4

Micro Impact Extrusion of Precision Cavities with Modular Dies
In: Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, Volume 2, 2010, Pages 81-85, ISBN 978-0-9553082-8-4

Micro Turning with Closed Electrolytic Free Jet
In: Proceedings of 6th International Symposium on Electrochemical Machining Technology, Vrije Universiteit Brussel, 2010, Editors: J. Deconinck, D. De Wilde, ISBN 978-90-5487-818-6

Simulation of a Forming Process for Joining a Piezo Aluminium Module
In: Proceedings of the European COMSOL Conference 2010, ISBN 978-0-9825697-6-4

Simulation of the Mechanical Stability of Inkjet-Printed Hierarchical Microsieves
In: Proceedings of the European COMSOL Conference 2010, ISBN 978-0-9825697-6-4

Entwicklung und Simulation eines Verfahrens zum elektrochemischen Abtragen von Mikrogeometrien mit geschlossenem elektrolytischen Freistrahl (Dissertation)
In: A. Schubert (Hrsg.): Scripts Precision and Microproduction Engineering, Band 2, Verlag Wissenschaftliche Scripten, 2010, ISBN 978-3-937524-95-5

Aktuelle Trends und Problemstellungen in der Fertigung von Zylinderlaufflächen von Verbrennungsmotoren
In: Sucasni technolohi v masinobuduvanni; vypusk 3: . - Charkiv, S. 34-40, 2009

Elektrochemisches Strukturieren von Oberflächen mit geschlossenem elektrolytischen Freistrahl
In: Tagungsband zum 12. Werkstofftechnischen Kolloquium, 2009, ISBN 978-3-00-029007-7

Qualifizierung der Einsatzbedingungen eines unversell einsetzbaren Rundschaft-Werkzeug-Systems mittels Belastbarkeitsuntersuchungen
In: XXIII. MicroCAD; M szekció: Gépgyártástechnológia és gyártórendszerek . - Miskolc : Univ., ISBN 978-963-661-878-0, S. 91-97, 2009 ; Kongress: MicroCAD; 23 (Miskolc) : 2009.03.19-20

Simulating the Influence of the Nozzle Diameter on the Shape of Micro Geometries Generated with Jet Electrochemical Machining
In: Proceedings of the European COMSOL Conference, 2009, ISBN 978-0-9825697-2-6

Simulation of a Heated Tool System for Jet Electrochemical Machining
In: Proceedings of the European COMSOL Conference 2009, ISBN 978-0-9825697-2-6

Simulation of a Modular Die Stamp for Micro Impact Extrusion
In: Proceedings of the European COMSOL Conference 2009, ISBN 978-0-9825697-2-6

Aktuelle Trends und Problemstellungen in der Fertigung von Zylinderlaufflächen von Verbrennungsmotoren
In: Vysoki technolohiï v masynobuduvanni. - Charkiv, 1, S. 79-85, 2009

All-purpose tool-system for research and industry based on circle shanks
In: Memorias \"La ingenieria mecánica en el mileno\". - Editorial Freijóo, insges. 9 S., 2008 ; Kongress: COMEC 2008; 5 (Santa Clara, Cuba) : 2008.11.04-06[Beitrag auf CD-ROM]

Flexible tool concept based on circle shanks for high performance cutting
In: International Conference High Performance Cutting <3, 2008, Dublin> : High performance cutting - micromachining; Vol. 1: . - Dublin : Univ. College Dublin, S. 305-314 ; Kongress: CIRP International Conference High Performance Cutting; 3 (Dublin) : 2008.06.12-13

Generating Micro Geometries with Air assisted Jet Electrochemical Machining
In: Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008, ISBN 978-0-9553082-5-3

Grundlegende Betrachtungen zum Eisentgraten - ein Verfahren zum Entgraten komplexer Bauteile
In: Memorias \"La ingenieria mecánica en el mileno\" . - Editorial Freijóo, ISBN 978-959-250404-2, insges. 6 S., 2008 ; Kongress: COMEC 2008; 5 (Santa Clara, Cuba) : 2008.11.04-06

Simulation of the Shape of Micro Geometries generated with Jet Electrochemical Machining
In: Proceedings of the European COMSOL Conference 2008, ISBN 978-0-9766792-3-3

Vacuum technology
In: Vacuum electronics. - Berlin [u.a.] : Springer, S. 483-520, 2008

Blick in den Elektrolytstrahl
In: Mikroproduktion, 4:44-47, 2008

Advanced design of milling cutter with casette-shaped insert holding
In: Acta mechanica Slovaca . - Kosice, Bd. 4.2008, 12, S. 71-74

Analysis of conering cut when end milling with tool inserts
In: Acta mechanica Slovaca . - Kosice, Bd. 4.2008, 12, S. 75-78

Investigation of ionization gauges with carbon nanotube (CNT) field-emitter cathodes
In: Journal of physics. - Bristol : IOP PublJournal of physics / Conference series; 100.2008, Kap. 092007

New high capacity getter for vacuum insulated mobile LH 2 storage tank systems
In: Vacuum. - Kidlington : Elsevier Science, Bd. 82.2008, 4, S. 431-434

Grundlegende Betrachtungen zum Eisentgraten als ein neuartiges Verfahren zum Entgraten komplexer Bauteile
In: Vysoki technolohi v masynobuduvanni . - Charkiv, 2, S. 176-182, 2008

Electrochemical Machining of Carbide Metal Micro Tools
In: Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007, Volume 2, 2007, Pages 509-512, ISBN 978-0-9553082-2-2

Fast Micro Structuring with Electrolyte Jet Machining
In: Proceedings of Fourth International Symposium on Electrochemical Machining Technology, Fraunhofer IWU Chemnitz, 2007, Editor: Andreas Schubert, ISBN 978-3-00-022770-7

Rundschaft - Werkzeugsystem - universell und flexibel einsetzbar in Forschung und Produktion
In: Proceedings of the 12th International Conference of Tools, ICT-2007: September 6-8, 2007, Miskolc, Hungary, / ed. by: Illés Dudás... - Miskolc, 2007; Dudás, Illés . - 2007, S. 53-62